Resin Bond for Paths and Driveways

Resin Bonded Surfacing : This system involves applying a strong cold resin screed, dressing the resin with kiln dried aggregate usually 1-3mm then removing the excess.
This will leave a non-permeable beautifully textured surface with very little loose gravel.
A Word of Warning
Some contractors sell a system called tar and chip as "bonded gravel". Tar & chip will fail within 6 months as it is very different to a resin system.

• An extremely hard wearing bonded aggregate surface.
• Resin Bond offers a natural pleasing appearance of loose aggregate without any of the set backs that come with loose aggregate surfaces.
• Resin Bond is extremly functional yet offers an atractive finish.
• This attractive, hard wearing, low maintenance surface uses a range of natural and recycled aggregates as well as recycled glass.
• The finished surface provides a bound paving system which is flexible and resistant to cracking.
• Applied to asphalt, concrete, timber, and steel surfaces, the versatile system is used for footpaths, carparks, cyclepaths, driveways, footbridges, and in theme park and landscaping schemes.

Benefits of Resin Bond from Climate Roofing

• Resin Bond is a two part resin dressing that can be applied to asphalt, concrete, timber or steel surfaces.
• Surfaces must be smooth, free of undulations & irregularity.
• Asphalt surfaces are closed off using Surface Sealer in order to prevent resin bleeding through the surface during application.
• The two part resin is thoroughly mixed using a whisk & spread onto the surface with a serrated squeegee, selected dried aggregate is then broadcast.
• All excess aggregate is swept off once resin has cured.
• A combination of resin and stone produces a beautiful hardwearing surface nearly ten times stronger than concrete!
• This is ideal for covering existing concrete or tired tarmac.
• It will bring any area ino the cutting edge of modern surfaces.
• It is also a low maintenance alternative to block paving and pattern imprinted concrete.